Nanyang City Srate Optical Instrument Manufactory

JP1 Swinging Shafts Polishing Machine

$ 0.00
Tag:


1) Number of shafts: 4
2) Shaft speed: 250~3600rpm
3) Lens diameter: ≤φ90mm
4) Lens curvature radius: ≤R80mm
5) House swinging frequency: 10~100rpm
6) House swinging angle: 0~45°
7) Connecting thread on the shaft: M16X1
8) Diameter of thread: φ18mm
9) Connecting thread on upper shaft: M16X0.5
10)Pressure of the upper shaft: 0.1~5kgf
11)Power supplyAC 380V/3P/4W/50HZ
12)Pressure: 0.5~0.7mpa
13)Overall dimension: 2600x880x1830mm
14)Net weightabout 1000kg
15)Total power: 2.56kw

Model JP1 Swinging Shafts Polishing Machine is a kind of equipment, which can be used to accurately grind and polish small lenses that will be applicated in the optical and electronic industries.
This machined consists of mechanical system and electrical system, its core controller is PLC, and the motors of the main shafts and swing shafts are controlled by 4 frequency converters separately, which can realize stepless speed variation of the main shafts and swing house. The range of the main shafts speed is 250~3600rpm and the range of the swing houses frequency is 10~100rpm.
The remarkable characteristics of the machines is that: before the works shafts start to run, it can be swung to an angle within 0~45°forward and backwardby a bar and a bar nut, and then an angle within 0~30°from this location as a balance point will be swung, which can own a higher working efficiency and better final quality than the normal optical equipment.
The control of the machine is divided into the automatic and manual modes. The processing time of the works can be set from 1 second to 99 hours according to the different curvature radius. In auto mode, all of auto operation can be realized in addition to dismantles and installation of the parts, the machine is running steadily with no vibration and low noise.
On water pot with one spindle is designed with a smart waterproof function, which its anti-spill door can be controlled pneumatically and electrically, so it is very convenient to diamantle the work pieces.